The High-Riser Changing Bench |
CODES:
3041 - 3057
The Hi-Riser bench is designed to accommodate a heavier person where the lifting force is act through the floor as well as the wall. It is suitable for fitting to brick, block, concrete and stud partitioning walls. Benches can be attached to tiled surfaces by using a backing board. All benches are provided with a safety rail as standard.
The two choices of frame provide solutions for wet and dry environments. The standard powder coated frame can be used in any dry room such as toilets and cloakrooms, whilst the satin finished stainless steel frame is ideal for shower rooms, and swimming pool changing areas.
The bench is manufactured in seven sizes for small children up to large adults with a starting height 40cm from the floor the bench surface will rise to 1 metre, providing an ideal working height for most therapists and carers.
The bench folds flat for storage against the wall. Existing pipe work on walls can be avoided by moving the bench off the wall by up to 150mm when being fitted.
Special features
-
Low voltage electrics
-
P66 protection against water
-
150 Kgs load capacity
-
600mm height range
-
400mm starting height for low level transfer
-
Quick release safety side
-
Folds away for space saving
-
Gas assisted foldaway
-
Seven bed frame sizes
-
Upholstery colour choice
-
Available in satin stainless steel or powder coated steel frame.
Powder Coat Code |
Satin Stainless Code |
Size |
Height Range |
Length |
Width |
3041 |
3051 |
1 |
400-1000 |
1200 |
550 550 600 600 650 650 650 |
Peter, a young adult, has easily transferred from his
wheelchair and has been raised on the Hi-Riser Bench
to the maximum height of 1m with quick locking safety
rail, raised in the user position
| SPECIFICATIONS: | |
| Actuator: | 600mm
stroke 3000N max lifting force 24V DC 5% duty – continuous use at maximum load is 1 minute, then rest for 19 Minutes. (applies to upward/downward movement – not when stationary). IP66 water protection |
| Control Box: | Mains
Voltage 220-240/100-120V AC, 50-60Hz Output voltage 24V DC Ambient temperature +5 to +40C IP66 protection Approved to EN60601-1 |
| Hand Set: | IP66 protection |
| User Weight: | 150Kg Maximum |
| Dimensions: | Upholstery: Length and Depth as shown. Fully dimensioned drawing available on request |
| Shipping Weight: | 75Kg Maximum + export crate packing |